ACM Products Co. Four and Five Inch Cut Off Saws

ACM Products Home Cut Off Saws Cut Off Wheels Documents Order Info Contact ACM ACM Products Home Cut Off Saws Cut Off Wheels Documents Order Info Contact ACM

PERFORMANCE

Ruggedly constructed from cast aluminum, these cut-off machines are designed to provide years of smooth, low maintenance operation. By using our saws for your various cutting applications, you are assured of a consistent, quality cut, time after time. These machines have been specifically designed for use with abrasive wheels. Using these machines, in conjunction with abrasive wheels, provides the ability to cut even difficult materials quickly and easily.

VERSATILITY

IDEAL for any Tool Room, Machine Shop, or Laboratory. From aluminum to zirconium, all your cutting needs are met with this one saw! This is due to the wide selection of abrasive cutting wheels that ACM Products stock. We offer over thirty different grits and thicknesses of abrasive cutting wheels to meet virtually any need.

PRECISION

When using the ACM saw, you will find that it provides a fast, clean cut with every stroke. Because there are no metal saw teeth, the wheel never gets dull. Abrasive wheels sharpen themselves during the cutting process. Enhance high-volume production with the 48-SR cutting jig. Utilizing this custom component ensures that the material being cut will have the exact length needed when cutting with tight tolerances.

COST EFFICIENT

ACM saws and cutting wheels provide an almost burr free cut, especially when used during a wet cut application. You can virtually eliminate the need for costly secondary finishing operations! However, not all applications permit cutting wet. Our wheels have been specially formulated to provide as small a burr as possible when utilized in dry cutting. What little burr remains, in most cases, can be easily flaked away with a fingertip! This feature makes follow-up grinding a thing of the past!

COMPLETELY PORTABLE

Because they weighs less than twenty pounds, the ACM Cut-off Saws can be used just about anywhere there is an electrical outlet. Requiring no installation, the machine can be moved around the shop hassle-free. Rubber feet prevent the machine from “creeping” or vibrating during use.

CONSTRUCTION

Both the model ACM-4 and ACM-5 are completely portable and weigh only 19 pounds, and measure 14 X 7 5/8 inches X 9 inches. The saws are sturdily constructed of aluminum castings and designed for long maintenance free operation. The finish is hammerloid gray. The spindle is precision ground and the bearings are sealed for maximum cutting accuracy. Completely manufactured in the U.S.A. with quality components, it meets the most rigid engineering standards.

MOTOR

Permanently lubricated, and grounded, the ½ horsepower, universal motor is rated at 1.9 amps, full load. The motor operates on 115V AC or DC, 60 cycles and runs at 10,000 RPM. (Note: As stated above, the saw operates at 5,000 RPM; the motor is geared down from 10,000 to 5,000 RPM with a 2:1 gear ratio on the pulleys.) A six-foot power cord is supplied with the unit.

No other saw on the market gives you as many
options for cutting such a variety of materials!

ACM-4 and ACM-5 Abrasive Cutting Machines offer performance, portability, and precision never before achieved in this size, or this price. ACM abrasive saws and cut off wheels are specifically engineered to provide optimum cutting performance in wet OR dry cutting applications. Completely portable, ACM Cut off Saws can be used just about anywhere there is an electrical outlet. Weighing only 19 pounds and requiring no installation, the machine can be moved around the shop hassle-free.